TEC B-SX4T Series Скачать руководство пользователя

Страница: 26 / 316

2. PRINTER SETUP

ENGLISH VERSION EO1-33034

2.10 Test Print

E2-14

2.10 Test Print (Cont.)

Press

the

[PAUSE]

key and the issue mode setting display will

appear. Select the issue mode with the

[FEED]

[RESTART]

key.

10.

Press the

[PAUSE]

key and the media size setting display will

appear. Select the media size with the

[FEED]

[RESTART]

key.

11.

Press the

[PAUSE]

key and the paper feed setting display will

appear. Select whether or not a paper feed is performed with the

[FEED]

[RESTART]

key.

12.

When the

[PAUSE]

key is pressed, one blank media will be issued.

Then the LCD Message Display will return to showing the test print
start message.

13.

Press the

[PAUSE]

key and then

[FEED]

key. When pressing the

[PAUSE]

key, the printer will print the specified issue counts of the

slant lines (1 dot).

14.

Press the

[FEED]

key and

[PAUSE]

key,

and the printer will print

the specified issue counts of the slant lines (3 dots).

15.

Press the

[FEED]

key and

[PAUSE]

key, and the printer will print

the specified issue counts of the characters of various sizes.

16.

Press the

[FEED]

key and

[PAUSE]

key, and the printer will print

the specified issue counts of the bar codes.

17.

Press the

[FEED]

key and

[PAUSE]

key, and the printer will print

the specified issue counts of blank labels.

18.

Press the

[PAUSE]

key and the LCD Message Display will return to

showing the test print start message.

!7(6735,17
7<3(>6@12&87

!7(6735,17

/$%(//(1PP

!7(6735,17

!7(6735,17
6/$17/,1('27

!7(6735,17
&+$5$&7(56

!7(6735,17
3$3(5)(('

!7(6735,17
%$5&2'(

NOTE:

When PAPER FEED is selected,
the printer feeds the media to the
correct print start position. If
the print start position
adjustment is unnecessary, select
PAPER NO FEED and save the
media.

NOTE:

If the

[FEED]

key is pressed after

the blank labels are printed, the
printer will enter the Factory Test
mode. To exit from the Factory
Test mode, press the

[PAUSE]

key.

!7(6735,17

12135,17,1*

Содержание B-SX4T Series





























































































































































































































































































































Результаты поиска

Содержание B-SX4T Series

Отзывы:

Похожие инструкции для B-SX4T Series

Бренды по названию

Популярные бренды

TEC B-SX4T Series, Руководство пользователя

Результаты поиска

Содержание B-SX4T Series

Отзывы:

Похожие инструкции для B-SX4T Series

Бренды по названию

Популярные бренды