TEC B-SX4T Series, Руководство пользователя

Страница: 228 / 316

5. SYSTEM MODE
EO18-33012A
5.5 PRINTER PARAMETER FINE ADJUSTMENT
5-39
NOTES: 1. The X Axis fine adjustment is performed to fine adjust the print position in horizontal
direction (left or right).
2. Adjust the X axis within the effective print range. After the value reaches the
coordinate 0, the value remains unchanged even if the subsequent fine adjustment is
performed in the negative direction.
3. This adjustment cannot be used in the Self Test mode or Test print.
4. The fine adjustment value equals to the sum of the fine adjustment values set by the
PC command and this parameter. The maximum X axis fine adjustment value is
±
99.5mm. When the value reached the maximum, the value remains unchanged even
if the subsequent fine adjustment is performed.
5.5.5 Print Tone Fine Adjustment (Thermal Transfer/Thermal Direct Print)
With this parameter you can fine adjust the Print Tone. When “<3>ADJUST SET” appears, press
the [PAUSE] key and the [FEED] key 4 times to enter the Print Tone Fine Adjustment (Thermal
transfer print) menu.
To change the screen to the Print Tone Fine Adjustment (Thermal direct print), press the [FEED]
key again.
When the LCD display shows “TONE ADJ.<T>” or “TONE ADJ.<D>”, press the [PAUSE] key to
start. And then, use the [FEED] or [RESTART] key to select a desired option.
[FEED] key: Pressing the [FEED] key one time causes a –1 tone change, up to –10 tones.
[RESTART] key: Pressing the [RESTART] key one time causes a +1 tone change, up to +10
tones.
After completing the fine adjustment, press the [PAUSE] key.
NOTES: 1. The fine adjustment value equals to the sum of the fine adjustment values set by the
PC command and this parameter. The maximum print tone fine adjustment value is
±
10 (thermal transfer print) or +7/-10 (thermal direct print). When the value reached
the maximum, the value remains unchanged even if the subsequent fine adjustment is
performed.
2. This is useful when print tone is required to be fine adjusted e.g.) When the ribbon is
changed to different type.
!$'-867 6(7
721( $'-'!
!$'-867 6(7
721( $'-7!
Thermal Transfer
Thermal Direct
[RESTART]
[FEED]
721( $'-7!
721( $'-7!
721( $'-7!
721( $'-7!
721( $'-7!
721( $'-'!
721( $'-'!
721( $'-'!
721( $'-'!
721( $'-'!
Darker
Lighter
Thermal Transfer Print Thermal Direct Print
Standard