6-34
6. DIAG. TEST OPERATION
EO18-33006
NOTES: 1. Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds enables a fast
forward.
2. A changed language is stored in memory by pressing the [PAUSE] key.
3. A changed language is not cleared by a parameter clear.
6.3.13 Language Selection for LCD Message
6.3 PARAMETER SETTING MODE
Power off
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
Press the [PAUSE] key.
Press the [PAUSE] key 14 times.
Slect a language to display the
LCD maessage with the [FEED]
key or [RESTART] key.
(See NOTE 1.)
Press the [FEED] key
and [RESTART] key at
the same time.
Press the [PAUSE] key.
< 1
D I A G N O S T I C V
>
1 . 0 A
M E
S A G E E N G L I S H
S
< 2
P A R A M E T E R S E T
>
Continued on Section
6.3.14 Auto Forward Wait
in Cut Mode
•
ENGLISH
•
ITALIAN
•
JAPANESE
•
SPANISH
•
DUTCH
•
FRENCH
•
GERMAN
