6-30
6. DIAG. TEST OPERATION
EO18-33006
6.3.9
Data Length Selection
6.3 PARAMETER SETTING MODE
Power off
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
Press the [FEED] key.
Press the [PAUSE] key 10 times.
Select data length with the
[FEED] key or [RESTART]
key. (See NOTE 1.)
Press the [FEED] key
and [RESTART] key
at the same time.
Press the [PAUSE] key.
Continued on Section 6.3.10
Stop Bit Selection.
8 bits
7 bits
< 1
D I A G N O S T I C V
>
1 . 0 A
D A
A L E N G .
T
8 b t s
< 2
P A R A M E T E R S E T
>
NOTES: 1. Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds enables a fast
forward.
2. A changed data length is stored in memory by pressing the [PAUSE] key.
