7-3
7. ON LINE OPERATION
EO18-33006
Receive buffer data is printed on the following condition.
■
Sample Print
[Print condition]
• Print width:
4.2"
• Sensor:
No sensor
• Print speed:
4"/sec.
• Print method (Thermal transfer/Thermal direct) which is in used is applied.
• 24-byte data is printed on one line.
(Revision Date: Apr. 25, 2002)
7.2 Dump Mode
53 43 24 3D 43 48 0A 00 1B 3A 2B 24 30 31 32
23 31 32 33 34 2C 31 2C 34 2C 41 0A 00 1B 20
45 67 3B 2C 0A 00 0D 30 7B 3C FF 24 30 31 32
20 4F 3D 2C 21 22 23 24 2C 30 41 42 43 44 5B
67 32 4C 4A 50 12 33 34 35 36 2C 43 44 45 2C
67 90 90 2C 34 35 36 37 2D 63 57 52 3B 79 97
70 12 2C 34 53 76 5F D4 CC A3 26 78 35 70 7B
Feed direction
30 5E FF 01 0B 3C 2C 12 40
45 89 00 30 30 30 31 2C 34
30 2E 9F 31 34 31 33 22 45
21 26 73 06 13 4C 3F 32 33
0A 00 45 4C A4 BB 45 34 23
56 5B 66 45 30 31 32 33 34
65 34 35 36 2C 40 0A 00 40
Receive buffer size
RS-232C:
10K bytes (427 lines)
Centronics I/F:
10K bytes (427 lines)
Network I/F:
8K bytes (342 lines)
BASIC 1:
4K bytes (171 lines)
BASIC 2:
4K bytes (171 lines)
NOTE:
When an error occurs on printing, an error message is displayed and the printing stops.
Pressing [PAUSE] key releases the error and restores the display to “<3> DUMP MODE”,
however an auto reissue is not performed after that.
