6-31
6. DIAG. TEST OPERATION
EO18-33006
NOTES: 1. Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds enables a fast
forward.
2. A changed data length is stored in memory by pressing the [PAUSE] key.
6.3.10 Stop Bit Selection
6.3 PARAMETER SETTING MODE
Power off
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
Press the [FEED] key.
Press the [PAUSE] key 11 times.
Select data length with the
[FEED] key or [RESTART]
key. (See NOTE 1.)
Press the [FEED] key
and [RESTART] key
at the same time.
Press the [PAUSE] key.
Continued on Section 6.3.11
Parity Selection.
2 bits
1 bit
< 1
D I A G N O S T I C V
>
1 . 0 A
S T
P B I T
O
1 b i t
< 2
P A R A M E T E R S E T
>
