Teac LX Series, Инструкция по эксплуатации

Страница: 87 / 148

Specifying Recording Devices and File Names
5-5
z
When Memory Becomes Full
If memory becomes full during recording, recording stops and a message is displayed on the PC screen.
z
Recording to a PC While Recording to Memory
To record to a PC while recording to memory, select
PC Recording
, enter the storage-destination directory in
PC, and then type the file name in the entry box below that. Also specify the number of digits in the ID
number.
Dropouts may occur in the data recorded on the PC if the PC cannot keep up with the transfer speed. Even in
this case, the data recorded in memory is not lost. If the data transfer rate of the PC does not catch up the
data transfer rate of the LX, the dropout will occur. The data transfer rate of the PC required for continuing the
data transfer to the PC can be estimated that the PC needs to receive approximately 1.5 times of 10 seconds
data generating by the data transfer rate of the LX within 10 seconds.
Data transfer rate of the LX = Sampling frequency x Number of channels x 2bytes/second
The voice memo is not recorded on the PC though it is kept in memory.
z
Automatically Save Data to Media
You can specify that data is to be automatically saved to the media after recording to memory stops. Before
opening this
New
dialog box, insert the media. Select
Auto Saving
and enter the folder name in
Directory
.
Use up to 8 characters for the folder name, with upper case used for alphabetic characters. However, if you
forget to insert the media before recording starts, you will be unable to copy automatically even if you insert the
media later. In such a case, use
File
and then
Copy
to copy.
Even if
Auto Saving
is selected, when the LX is powered off the setting is disabled. So select
Auto Saving
each time you turn the power on. Do not use this function when using the LX as a stand-alone device because,
in such a situation, the system does not know how much free space is left on the media.