Teac LX Series, Инструкция по эксплуатации

Страница: 131 / 148

File Format
6-17
. , : ; < > [ ] * ? = / ¥ ¦
. , : ; < > [ ] * ? = / ¥ ¦
File Format
Type of Files
The LX makes a binary-format data file and ASCII-format header file each time recording stops or pauses.
Data file:
Contains A/D data in binary format. The file extension is dat.
Header file: Contains recording conditions, etc., in text format. The file extension is hdr.
z
The files are stored in DOS format on the media.
z
When a voice memo is recorded, a WAVE file is made in addition to the above. You can play this WAVE
file in the Windows Media Player.
File Name
The file name is common to the data file and header file. An ID number is added to the end of the specified
file name. When you specify a new file name, the ID number starts from 1. After recording is stopped or
paused, the ID number is automatically incremented each time the recording restarts. If a data file with the
same name or same ID number already exists when recording to the media or PC, the next ID number is used.
z
When Recording to Memory or to the media
To specify a file name, choose File and New, and then specify the file name in Dataset. For the file name, use
up to 5 alphanumeric characters. You cannot use the following characters:
The system attaches a 3-digit ID number (starting from 001) to these 5 characters to make a total of 8
characters. If you specify 4 or fewer characters, the system changes the total number of characters to 8 by
using a 0 before the 3-digit ID number to pad each of the missing locations.
z
When Recording to a PC
When recording to a PC, or when recording to a PC while recording to memory or the media, there is no
restriction on the length of the file name. You cannot use the following characters:
An ID number of up to 8 characters can be added to that file name.