Teac LX Series, Инструкция по эксплуатации, Страница: 17 / 148

Notes on Usage
1-7
z
Clean Disk and Lens
Dust might collect on an MO disk or lens after they have been used for a long time. This dust might cause
errors. To prevent this problem, clean the MO disk and lens using a cleaning kit (separate purchase). The
period after which cleaning is required depends on the environment but, as a general rule, clean once every
three months.
9
To clean an MO disk, use the cleaning kit TZ-381 (separate purchase). To clean a lens, use the lens
cleaner 0240470 (separate purchase).
9
For details on how to clean, see the explanation supplied with the cleaning kit.
z
Handling PC Card
To discharge static electricity from your body, touch a metallic surface near you before handling the unit.
Never touch the media being inserted to the PC card slot while recording and playing back.
z
Make Sure to Select FAT16 When Formatting Media by Windows Operation
The LX file format does not support FAT32, use FAT16 format before using.
z
About No MO/PC Card Drive
The drive is not installed. Naturally, the functions concerning the recording to the media are disabled.
z
About No Output Amp Model
The output amplifier is not installed. Naturally, the functions concerning the output amp are disabled.
However, you can view the reproduced data on a PC.
z
Power OFF While Amp Calibration State
When turning on the power of the LX unit, the unit goes into the calibration of the installed amps
automatically (Input level LED on each amp are flashing in red), and then goes to the ready state for
operations (Input level LED turns on green). Turning the power OFF while the amp calibration state
initializes the setting parameters.