409-32023
Rev
B
25 of 41
Figure 37
3.3.
I/O Interface Settings
1. Use the Right navigation key to move to the Precision Controller icon. See Figure 38.
2. To change the
“Host Mode”, use the Down navigation arrow to move to the Host Mode field. Press the
Enter key to enter the Host Mode selection field. See Figure 38.
A pop-up selection box will appear with choices available for selection. Use the Up and Down arrow
keys to move within the selection box. Then save a selection by pressing the Enter key or cancel and
exit by pressing the Cancel key.
Figure 38
3. Use the Down navigation
key to move to “Trigger1 Dwell”. See Figure 39.
To change the value of the Trigger1 Dwell field:
a. Click the Enter key to enter the field.
b. Small Up and Down arrow key
s will appear inside the field box for “Trigger1 Dwell”. See Figure 39.
Use the arrow keys to increase or decrease the Trigger1 Dwell time.
c. To save or exit the field, use the Enter key to save or the Cancel key to cancel the change.
Apply and Abort Pushbuttons
Feeder Setup Complete
Precision Controller Icon
Selection Box
Downloaded From
