TCS Basys Controls SZ1022N, Руководство по эксплуатации продукта

Страница: 14 / 20

R
2800 LAURA LANE • MIDDLETON, WI 53562 • (800) 288-9383 • FAX (608) 836-9044 • www.tcsbasys.com
14
Pointmap Table for SZ1022N (continued)
NPT NPA UNITS POINT DESCRIPTION RANGE/VALUE ADDITIONAL NOTES
ADI 40 Tuesday 0-1440
ADI 41 Wednesday 0-1440
ADI 42 Wednesday 0-1440
ADI 43 Wednesday 0-1440
ADI 44 Wednesday 0-1440
ADI 45 Thursday 0-1440
ADI 46 Thursday 0-1440
ADI 47 Thursday 0-1440
ADI 48 Thursday 0-1440
ADI 49 Friday 0-1440
ADI 50 Friday 0-1440
ADI 51 Friday 0-1440
ADI 52 Friday 0-1440
ADI 53 Saturday 0-1440
ADI 54 Saturday 0-1440
ADI 55 Saturday 0-1440
ADI 56 Saturday 0-1440
ADI 57 Sunday 0-1440
ADI 58 Sunday 0-1440
ADI 59 Sunday 0-1440
ADI 60 Sunday 0-1440
BD 1 DI1 control mode 0=fan proving, See “Operation” (page 8).
1=Monitor
BD 2 Unocc fan mode 0=cool, 1= auto Not accessible with Fan Switch button.
BD 3 Enable occupied fan switch 0 = No, 1=Yes Enables Fan Switch button.
BD 4 Enable system switch 0 = No, 1=Yes Enables System Switch button.
BD 5 Use of discharge air sensor 0 = No, 1=Yes Always monitored, enables discharge
air function.
BD 6 Enable smart recovery routine 0 = No, 1=Yes 4° per hour setpoint ramp prior to oc-
cupancy for both heating and cooling.
BD 7 Require access code 0 = No, 1=Yes Programming access from keypad.
for programming?
BD 8 Require access code 0 = No, 1=Yes Clock/Schedule access from keypad.
for clock/schedule?
BD 9 Enable cool stage 2 0=disable, 1=enable Disable unused stages (recommended).
BD 10 Enable heat stage 2 0=disable, 1=enable
BD 11 Enable stage 3 0=disable, 1=enable
BD 12 Stage 3 action 0=cool, 1=heat Stage 3 can be either heating or cooling.
BD 13 Time clock relay output 0=Normally Open State of relay output during occupied
1=Normally Closed period.
BD 14 Control mode 0=Proportional Stages turned on and off using offsets
and differentials only.
1=Prop. + Integral Stages turned on and off using offsets
and differe a time factor.
BD 15 DI1 source 0=local contact Local means read by or controlled by
Thermostat.
1=remote request Remote means the state of the input or
output is controlled only by computer.
BD 16 DI2 source 0=local contact
1=remote request
BD 17 DI3 source 0=local contact
1=remote request
BD 18 Override function source 0=local keypad
1=remote request
BD 19 Fan relay source 0=local mode
1=remote request
BD 20 Remote DI1 request 0=off, 1=on When selected to be Remote, turns
input or output on and off.