TCi HGP HarmonicGuard Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 8 / 67

HGP Kit Manual 2.0 General Information
4
2.0 General Information
Thank you for selecting the HGP filter kit. TCI has produced this filter for use in many variable
frequency drive (VFD) applications that require input power line harmonic current reduction. This
manual gives an overview of how to install, operate and maintain the HGP PQconnect Filter kit.
Please contact TCI Technical Support or visit transcoil.com/Support.htm for additional information.
Intended Audience
This manual is intended for use by all personnel responsible for the assembly, wiring installation,
operation and maintenance of the HGP filters and kits. Such personnel are expected to have knowledge
of electrical wiring practices, electronic components and electrical schematic symbols. Panel design
using a TCI HGP Filter Kit should be performed with appropriate engineering supervision so the design
meets the requirements based on materials utilized in the construction of the panel, wiring practices
followed by your shop, and the actual ambient conditions of the components for each application.
Receiving Inspection
The HGP filter kit has been thoroughly inspected at the factory and carefully packaged for shipment.
When you receive the unit, you should immediately inspect the shipping container and report any
damage to the carrier that delivered the unit. Verify that the part number of the components you
received is the same as the part numbers listed on the engineering drawings for the kit.
Storage Instructions
If the HGP Kit filter is to be stored before use, be sure that it is stored in a location that
conforms to published storage humidity and temperature specifications on the applicable
technical drawings available at: https://transcoil.com/products/kits-page/hgp-kits/ . Store
the unit in its original packaging.
TCI Limited Warranty Policy
TCI, LLC (“TCI”) warrants to the original purchaser only that its products will be free from defects
in materials and workmanship under normal use and service for a period originating on the date of
shipment from TCI and expiring at the end of the period described below:
Product Family Warranty Period
KLR, KDR For the life of the drive with which they are installed.
HGA, KLC, KLCUL, KMG,
MSD, V1k
One (1) year of useful service,
not to exceed 18 months from the date of shipment.
PF Guard, HGP, HGL, HG7,
HSD, KRF
Three (3) years from the date of shipment.
KCAP, KTR, Five (5) years from the date of shipment.
All Other Products
One (1) year of useful service,
not to exceed 18 months from the date of shipment.
The foregoing limited warranty is TCI’s sole warranty with respect to its products and TCI makes
no other warranty, representation, or promise as to the quality or performance of TCI’s products.
THIS EXPRESS LIMITED WARRANTY IS GIVEN IN LIEU OF AND EXCLUDES ANY AND ALL
EXPRESS OR IMPLIED WARRANTIES INCLUDING, WITHOUT LIMITATION, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
This warranty shall not apply if the product was:
a) Altered or repaired by anyone other than TCI;
b) Applied or used for situations other than those originally specified; or
c) Subjected to negligence, accident, or damage by circumstances beyond TCI’s control,
including but not limited to, improper storage, installation, operation, or maintenance.