TCi HGP HarmonicGuard Series Скачать руководство пользователя страница 9

Страница: 9 / 67

HGP Kit Manual

2.0 General Information

If, within the warranty period, any product shall be found in TCI’s reasonable judgment to be

defective, TCI’s liability and the Buyer’s exclusive remedy under this warranty is expressly limited,

at TCI’s option, to (i) repair or replacement of that product, or (ii) return of the product and refund

of the purchase price. Such remedy shall be Buyer’s sole and exclusive remedy. TCI SHALL NOT,

IN ANY EVENT, BE LIABLE FOR INCIDENTAL DAMAGES OR FOR CONSEQUENTIAL

DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF INCOME, LOSS OF TIME, LOST

SALES, INJURY TO PERSONAL PROPERTY, LIABILITY BUYER INCURS WITH RESPECT TO

ANY OTHER PERSON, LOSS OF USE OF THE PRODUCT OR FOR ANY OTHER TYPE OR

FORM OF CONSEQUENTIAL DAMAGE OR ECONOMIC LOSS.
The foregoing warranties do not cover reimbursement for removal, transportation, reinstallation, or

any other expenses that may be incurred in connection with the repair or replacement of the TCI

product.
The employees and sales agents of TCI are not authorized to make additional warranties about

TCI’s products. TCI’s employees and sales agent’s oral statements do not constitute warranties;

these shall not be relied upon by the Buyer, and are not part of any contract for sale. All warranties

of TCI embodied in this writing and no other warranties are given beyond those set forth herein.
TCI will not accept the return of any product without its prior written approval. Please consult TCI

Customer Service for instructions on the Return Authorization Procedure.

Содержание HGP HarmonicGuard Series




































































Результаты поиска

Содержание HGP HarmonicGuard Series

Отзывы:

Похожие инструкции для HGP HarmonicGuard Series

Бренды по названию

Популярные бренды

TCi HGP HarmonicGuard Series, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание HGP HarmonicGuard Series

Отзывы:

Похожие инструкции для HGP HarmonicGuard Series

Бренды по названию

Популярные бренды