TCi HGP HarmonicGuard Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 45 / 67

HGP Kit Manual 5.0 PQconnect
41
Write Parameters:
Table 19: Network Interface INPUT/Setpoint Register Map
Parameter Name
I/O Reg
Address
Offset
Signal
Direction
to Filter
Data Values and
Examples
Description
STATUS_FILTER_A_RELAY_ACTION 540 Input
0 = Disabled
DEFAULT: 9
Range: 0 to 65535
To Enable desired status detections, enter
bit mask from table by converting to
decimal
If a status is active and the bit
corresponding to that status in this mask is
set, the relay will be activated.
Reference Table 22: Filter Status
References*
STATUS_FILTER_B_RELAY_ACTION 541 Input
0 = Disabled
DEFAULT: 49151
Range: 0 to 65535
STATUS_LINE_RELAY_ACTION 542 Input
0 = Disabled
DEFAULT: 71
Range: 0 to 65535
To Enable desired status detections, enter
bit mask from table by converting to
decimal
If a status is active and the bit
corresponding to that status in this mask is
set, the relay will be activated
Reference Table 23: Filter Line Status
References*
STATUS_FILTER_LOAD_RELAY_ACT
ION
543 Input
0 = Disabled
DEFAULT: 63
Range: 0 to 65535
To Enable desired status detections, enter
bit mask from table by converting to
decimal
If a status is active and the bit
corresponding to that status in this mask is
set, the relay will be activated.
Reference
Table 24: Filter Load Status References*
CNT_CLOSE_LOAD_THERSHOLD 570 Input
DEFAULT: 30 = 30%
Range: 10 to 100 %
Contactor close threshold in percent rated
current*
CNT_CLOSE_LOAD_HYSTERESIS 571 Input
DEFAULT: 5 = 5%
Range: 2 to 50 %
Contactor will open when it reaches the
hysteresis *
CNT_CLOSE_KVAR_THERSHOLD 572 Input
DEFAULT: 50 = 50
kVAR
Range: 0 to 1000
kVAR
Contactor close threshold for kVAR
control*
CNT_CLOSE_KVAR_HYSTERESIS 573 Input
DEFAULT: 10 = 10%
Range: 5 to 100 %
Contactor will open when it reaches the
hysteresis *
CNT_CLOSE_DELAY 574 Input
DEFAULT: 5 = 5
seconds
Range: 1 to 3600
seconds
Contactor Close Delay*
CNT_OPEN_DELAY 575 Input
DEFAULT: 5 = 5
seconds
Range: 1 to 3600
seconds
Contactor Open Delay*