TC Electronic FireworX Скачать руководство пользователя

Страница: 62 / 83

THE BLOCKS

delay gives very small variations in pitch. These pitch

changes blended with the direct sound give you the Chorus

sound, while the modulated signal alone will give you a

Pitch modulator also known as Vibrato. The difference

between Chorus and Flanging is the Feedback of the

Flanger, and the size of the modulated delay. Chorus

sounds use delay times around 10-20 ms while Flanger

tends to use times around 1-10 ms. The Feedback is the

parameter that gives you that classic mid-range tone. The

parameters available in the Modifier Matrix are marked

with an asterisk*.

Classic Chorus

The Classic Chorus uses a relationship between Speed and

Depth called the Golden Ratio. This feature was inherited

from the TC 2290. The parameters available in the Modifier

Matrix are marked with an asterisk*.

CHORUS/FLANGER

Mod Link

Enables you to bypass the internal LFO of the Chorus, and

control the sweep manually through the Modifier Matrix.

When set to Shape the Speed entrance in the Modifier

Matrix works as manual control over the Chorus. Speed

lets the Chorus internal LFO handle the modulation.

Speed*

The modulation speed of the Chorus, also known as Rate.

Tempo

The Tempo parameter sets the relationship to the global

Tempo e.g. if you set it to 1/4T the Chorus will use quarter

note triplet of the tapped tempo to perform one cycle.

1/4 equals the BPM (tapped Tempo).

The subdivisions available are, 16/1 (16 bars for performing

one period), 8/1, 4/1, 2/1, 1/1, and 1/2-1/32 in straight,

dotted and triplet notes - 1/4 equals BPM (beats per minute).

If you select Ignored the current parameter will use the

Preset value and will not be affected by the Global Tempo.

Depth*

Adjusts the modulation depth of the Chorus, also known as

Intensity.

Mix*

Mixes between direct sound and effect.

In Level*

Controls the input level of the block.

Create a Vibrato by setting the Mix at 100%,

Depth at 5-10% and Speed to 1-2Hz.

Advanced Chorus

Advanced Chorus adds some extra parameters like LFO

Phase and Curve. The parameters available in the Modifier

Matrix are marked with an asterisk*.

Mod link

Enables you to bypass the internal LFO of the Chrous, and

control the sweep manually through the Modifier Matrix.

When set to Shape the Speed entrance in the Modifier

Matrix works as manual control over the Chorus. Speed

lets the Chorus internal LFO handle the modulation.

Speed*

The modulation speed of the Chorus, also known as Rate.

Tempo

The Tempo parameter sets the relationship to the global

Tempo e.g. if you set it to 1/4T the Chorus will use a quarter

note triplet of the tapped tempo to perform one cycle.

1/4 equals the BPM (tapped Tempo).

The subdivisions available are, 16/1 (16 bars for performing

one period), 8/1, 4/1, 2/1, 1/1, and 1/2-1/32 in straight,

dotted and triplet notes - 1/4 equals BPM (beats per minute).

If you select Ignored the current parameter will use the

Preset value and will not be affected by the Global Tempo.

Depth*

Adjusts the Modulation depth of the Chorus, also known as

Intensity.

Delay

As described earlier, a Chorus/Flanger is a Delay being

modulated by an LFO. This parameter makes it possible to

change the length of that Delay. A typical Chorus uses

delays at approximately 10ms, while a Flanger uses delays at

around 5ms.

Содержание FireworX




















































































Результаты поиска

Содержание FireworX

Отзывы:

Похожие инструкции для FireworX

Бренды по названию

Популярные бренды

TC Electronic FireworX, Руководство пользователя

Результаты поиска

Содержание FireworX

Отзывы:

Похожие инструкции для FireworX

Бренды по названию

Популярные бренды