TC Electronic FireworX Скачать руководство пользователя

Страница: 36 / 83

MODIFIERS

Modifier

Out 2 Phase

An LFO phase change causes a small delay in the second

waveform starting point. This means that out 1 and 2 start the

current waveform at two different points. Example: If Out 2

Phase is set to 180 degrees, Out 1 and 2 will be exactly opposite.

LFO PHASE

Default

Sets the default state that the LFO will be in when recalled.

When set to Stopped, the LFO will be stopped until triggered

via the Modifier Matrix.

When set to Running the LFO will continue to run until

retriggered via the Modifier Matrix.

Trig

Sets the action carried out when the LFO is triggered via the

Modifier Matrix. To change the state of the LFO the control

value must come from the opposite state. Example: If the LFO is

running and you want to stop it via the Trig input, the control

value must be above 55% to perform a valid Stop. (Value below

45%).

Stop/Cont -Will Stop the LFO when the control value is below

45%, and Continue LFO playback when the control

value is above 55%.

Stop/Rest - Will Stop the LFO when the control value is below

45%, and Restart LFO playback when the control

value is above 55%.

Restart - Will restart the LFO when the control value is above

55%.

Freeform

The Freeform modifier is a small sequencer that can output a

series of up to 32 samples of control values over a period of time.

The values of the samples can be edited individually and

playback speed can be adjusted according to the global tempo.

The parameters available in the Modifier Matrix are marked with

an asterisk*.

90 phas

change

Speed*

Sets the playback speed of the Freeform modifier. The defined

number of samples will be played back over the amout of time

set by the Speed parameter. E.g. if Speed is set to 1Hz the

defined number of samples will be played back once every

second.

Tempo

Sets the Freeforms relationship to the global tempo. The defined

number of samples will played back during the value set by

Tempo. Example: If Freeform is set to 8 samples and Tempo is

set to 4/1 (4 bars) you will hear two samples in each bar.

Depth*

Sets the maximum value of Freeform. This means that all

samples can be scaled down using this parameter.

Loop mode

The loop mode determines how or whether Freeform is looping.

Off -

Will cause Freeform to playback the samples once

and then stop.

FWD -

Will make Freeform loop forward continuously.

BWD -

Will make Freeform loop backward continuously.

Switch - Will make Freeform switch between forward and

backward looping, starting with forward.

Gliding

Sets whether the Freeform jumps from one sample value to

another or glides to make a smoother transition between the

samples.

Default

Sets the default state that Freeform will be in when recalled.

When set to Stopped, Freeform will stay stopped until

triggered via the Modifier Matrix.

When set to Running Freeform will continue to run until

retriggered via the Modifier Matrix.

Trig (Start/Stop)*

Sets the action carried out when Freeform is triggered via the

Modifier Matrix. To change the playback state of the Freeform

the control value must come from the opposite state. Example: If

Freeform is running and you want to stop it via the Trig input,

the control value must be above 55% to perform a valid Stop.

(Value below 45%).

Stop/Cont -Will Stop Freeform playback when the control value

is below 45%, and Continue Freeform playback when

the control value is above 55%.

Stop/Rest - Will Stop Freeform playbackwhen the control value

is below 45%, and Restart Freeform playback when

the control value is above 55%.

Содержание FireworX




















































































Результаты поиска

Содержание FireworX

Отзывы:

Похожие инструкции для FireworX

Бренды по названию

Популярные бренды

TC Electronic FireworX, Руководство пользователя

Результаты поиска

Содержание FireworX

Отзывы:

Похожие инструкции для FireworX

Бренды по названию

Популярные бренды