TC Electronic FireworX Скачать руководство пользователя

Страница: 55 / 83

RESONATOR

Resonator Voice 1-4*

These parameters adjust the length of the four delays and

thereby change the resonant frequencies.

Range: 55Hz-1750Hz.

Feedback Voice 1-4*

The Feedback adjusts the resonance of the resonators.

The feedback of the resonators is preadjusted, but these

feedback parameters allow you to customize them for your

purpose. Note that negative feedback produces different

harmonics than positive.

Filter placement 1-4

These parameters switch the high and low cut filter and

levels to be placed before or after the resonators.

Locut Voice 1-4*

Cuts off frequencies lower than the selected frequency on the

Vocal input. The slope of the filter is 12dB/octave.

Range: 10Hz-16kHz.

Highcut Voice 1-4*

Cuts off frequencies higher than the selected frequency. The

filter is relative to the Frequency of the corresponding

Resonator voice. The slope of the filter is 12dB/octave.

Range: 0-100%.

Levels Voice 1-4*

Sets the level of each of the four resonators.

Panning Voice 1-4*

Sets the panning of each of the four resonators.

Mix*

Mixes between direct sound and effect.

In Level*

Controls the input level of the block.

Out Level*

Controls the output level of the block.

THE BLOCKS

NOTE: The peak of the filters can get very loud and can

easily hit the internal ceiling and thereby cause distortion.

To prevent that, turn down the input level of the Filter block.

Resochord

The Resochord is based on the same algorithm as the

Resonator. However, in the Resochord the four resonators

are scaled within chords. All you have to do is change the

master frequency to tune the chord in the key you desire.

The parameters available in the Modifier Matrix are marked

with an asterisk*.

RESOCHORD

Freq*

The master frequency, tuning the four resonators to one base

key simultaneously.

Chord

Sets the four resonators up in various chord relationships.

Choose between: Major, Major 6th, Major 7th, Major Maj

7th, Minor, Minor 6th, Minor 7th.

Feedback Voice 1-4*

The Feedback adjusts the resonance of the resonators.

The feedback of the resonators is preadjusted, but these

feedback parameters allow you to customize them for your

purpose.

Filter placement Voice 1-4

These parameters switch the high and low cut filter and

levels to be placed before or after the resonators.

Locut Voice 1-4*

Cuts off frequencies lower than the selected frequency. The

slope of the filter is 12dB/octave.

Range: 10Hz-16kHz.

Highcut Voice 1-4*

Cuts off frequencies higher than the selected frequency. The

Содержание FireworX




















































































Результаты поиска

Содержание FireworX

Отзывы:

Похожие инструкции для FireworX

Бренды по названию

Популярные бренды

TC Electronic FireworX, Руководство пользователя

Результаты поиска

Содержание FireworX

Отзывы:

Похожие инструкции для FireworX

Бренды по названию

Популярные бренды