TC Electronic FireworX Скачать руководство пользователя

Страница: 45 / 83

SYSTEM & MIDI

I/O Setup

which type the current product is using).

If set to disabled, the FireworX will act as a standard MIDI

product.

Sysex device ID

The System exclusive ID of the FireworX. This is used when

performing bulk dumps to and from the FireworX.

Program change offset

With this parameter you are able to add to or subtract from the

incoming Program change; e.g. the incoming Program change is

Preset 123, and the offset is set to +1, the Program change will

now be 124.

NOTE: The FireworX Presets start at #1.

Mapping mode

Sets which bank incoming program changes should be send to:

ROM (Factory), USER, CARD or Custom. This means that you

can guide all incoming Program changes to any of the three

banks, or you can design your own Custom MIDI map.

Custom Map

In the Custom Map you can decide what every incoming

Program change should map to, using the Map Program Change

No. and the Into Preset parameters.

Map Program change no.

Use this parameter to select the Program change number you

want to remap.

Into Preset

Use this parameter to set the new destination of the selected

program change number.

Reset Custom Map

Place the cursor on this parameter and press Enter to Reset the

Custom map.

Ext. Controllers

There are two physical connection possibilities when connecting

an external controller to the FireworX. One way is to connect it

directly to the External Control jack on the back panel of the

FireworX. The other way is to MIDI controllers, connecting to

the MIDI In socket of the FireworX. The Alpha Mod. and the

Effect bypass uses the set up as both send and receive controller.

This means that e.g. the Alpha Mod. control values are

transmitted on the same channel and controller number as the

Alpha Mod. is responding to.

To make it easy for you to set up an External controller,

we designed a Learn function. Place the cursor on the

parameter you want to control, press Enter to activate

Learn, and move your External controller. The FireworX

will now automatically detect the incoming controller, no

matter if it is connected to MIDI or to the pedal jack.

In each of the following parameters, you can setup the input that

the current parameter should be controlled by. In the first column

you set up the source and in the second column you set up the

type of the controller. Here is a description of the possibilities -

Column 1

Pedal:

The FireworX pedal input (see back

panel).

MIDI basic:

The parameter will respond to the basic

FireworX MIDI channel (set in MIDI).

MIDI Omni:

The current parameter will respond to

all channels.

MIDI 1-16:

The parameter will only respond to this

channel.

Column 2

(please note that this column is only available when col.1 is set to

MIDI).

Pitch Bend

Standard MIDI Pitch Bend.

Aftertouch

Standard MIDI Aftertouch.

Note-On/Off

Standard MIDI Note-On/Off.

Note-On key

Standard MIDI Note-On key.

Note On Velocity Standard MIDI Velocity.

Controller 0-127 MIDI standard controllers.

Prg. Change

The Program Change feature is very

special.

If a parameter is set to a certain Program Change, the

current parameter will be toggled on/off by the current

Preset change.

NOTE: If you are using a Program Change on the MIDI basic

channel for controller purposes, the current Program Change will

be ignored and will not perform a program change on the

FireworX.

Setup bank

The FireworX has four banks that you can use for your different

setups. By using the Value wheel, you can change the active bank

from 1 through 4. The banks are instantaneously Stored and

Recalled, meaning that any change you make in the Control

menu is remembered in the current bank, and Recalled the next

time you select that particular bank.

Содержание FireworX




















































































Результаты поиска

Содержание FireworX

Отзывы:

Похожие инструкции для FireworX

Бренды по названию

Популярные бренды

TC Electronic FireworX, Руководство пользователя

Результаты поиска

Содержание FireworX

Отзывы:

Похожие инструкции для FireworX

Бренды по названию

Популярные бренды