TC Electronic FireworX Скачать руководство пользователя

Страница: 66 / 83

THE BLOCKS

Dual Three Tap

The Dual Three Tap Delay is capable of performing three

delay taps on each of the two delay lines. The delay time is

shared between the two delay lines, e.g. if Delay line 1 is

using 500 ms Delay line 2 will have 850 ms available. The

two delay lines have their own Input level, which basically

means that they perform much like two individual delay

processors. The parameters available in the Modifier Matrix

are marked with an asterisk*.

DUAL THREE -TAP

Delay Line 1&2

Time 1-2-3

Sets the delay time of the two taps on Delay line 1.

Maximum delay time per tap is 1350 ms.

Tempo

The Tempo parameter sets the relationship to the global

Tempo e.g. if you set it to 1/4T the Delay will use quarter

note triplet of the tapped tempo to perform one cycle.

1/4 equals the BPM (tapped Tempo).

The subdivisions available are, 16/1 (16 bars for performing

one period), 8/1, 4/1, 2/1, 1/1, and 1/2-1/32 in straight, dotted

and triplet notes - 1/4 equals BPM (beats per minute).

If you select Ignored the current parameter will use the

Preset value and will not be affected by the Global Tempo.

Feedback 1-2-3*

Sets the amount of feedback on Tap 1 and 2.

NOTE: The sum of the two feedbacks is limited to 100%.

Levels 1-2-3*

Sets the level of each of the two taps.

Pan Position 1-2-3*

Controls the panning of the two Delay taps.

Lowcut 1-2-3*

Cuts off frequencies lower than the selected frequency. The

slope of the filter is 12dB/octave.

Highcut 1-2-3*

Cuts off frequencies higher than the selected frequency. So if

you feel that there is too much treble in your signal, you can

remove it by adjusting the highcut filter down. The slope of

the filter is 12dB/octave.

Line Level 1-2*

Adjusts the input level of the two Delay lines. This enables

you to lower the level of one of the two lines without

affecting the second. The Line level is a percentage

adjustment of the algorithm In Level.

Mix*

Mixes between direct sound and effect.

In Level*

Controls the input level of the block.

Out Level*

Controls the output level of the Delay block.

One Tap

The One Tap is a mono in, mono out sub-algorithm.

The parameters available in the Modifier Matrix are marked

with an asterisk*.

ONE TAP

Time

Sets the delay time. Maximum delay time is 1350 ms.

Tempo

The Tempo parameter sets the relationship to the global

Tempo e.g. if you set it to 1/4T the Delay will use quarter

note triplet of the tapped tempo to perform one cycle.

1/4 equals the BPM (tapped Tempo).

The subdivisions available are, 16/1 (16 bars for performing

one period), 8/1, 4/1, 2/1, 1/1, and 1/2-1/32 in straight, dotted

and triplet notes - 1/4 equals BPM (beats per minute).

If you select Ignored the current parameter will use the

Preset value and will not be affected by the Global Tempo.

Feedback*

Adjusts the amount of Feedback.

Pan Position*

Controls the panning of the Delay.

Содержание FireworX




















































































Результаты поиска

Содержание FireworX

Отзывы:

Похожие инструкции для FireworX

Бренды по названию

Популярные бренды

TC Electronic FireworX, Руководство пользователя

Результаты поиска

Содержание FireworX

Отзывы:

Похожие инструкции для FireworX

Бренды по названию

Популярные бренды