TC Electronic FireworX Скачать руководство пользователя

Страница: 71 / 83

THE BLOCKS

one period), 8/1, 4/1, 2/1, 1/1, and 1/2-1/32 in straight, dotted

and triplet notes - 1/4 equals BPM (beats per minute).

If you select Ignored the current parameter will use the

Preset value and will not be affected by the Global Tempo.

Depth*

Will set the intensity of the Tremolo, i.e. how deep it sweeps.

Curve

(Only in Advanced)

Sets the curve of the LFO. Choose between: Square, Sine, or

Triangle.

The most common LFO curve in Tremolo is Triangle.

Use the Square waveform with 100% Depth to get

holes in your sound (called Transforming).

Pulsewidth*

(only in Advanced)

Controls the division of the upper and lower part of the

current waveform, e.g. if Pulsewidth is set to 75%, the upper

half of the waveform will be on for 75% of the time.

LFO Phase

(only in Advanced)

An LFO phase change causes a small delay in one of the

waveform starting points. This means that left and right

outputs start the current waveform at two different points.

Example: If LFO phase is set 180º, the left and right will be

exactly opposite.

Mix*

Mixes between direct sound and effect.

In Level*

Controls the input level of the block.

Out Level*

Controls the output level of the block.

Pulsewidth

Square

Triangle

Sine

Simple/Surround Panner

The Panner changes the level of the source signal opposite in

left/right according to the LFO curve, depth and speed. The

Surround Panner is capable of panning beyond normal stereo

image by changing the phase of the signal while panning.

The parameters available in the Modifier Matrix are marked

with an asterisk*.

PAN+TREMOLO

Mod Link (Only in Simple Panner)

Enables you to bypass the internal LFO of the Panner, and

control the sweep manually through the Modifier Matrix.

When set to Shape the Speed entrance in the Modifier

Matrix works as manual control over the Panner. Speed lets

the Panners internal LFO handle the modulation.

Speed*

Controls the speed of the Panner. The simple Panner always

pans fully Left and Right.

Tempo

The Tempo parameter sets the relationship to the global

Tempo e.g. if you set it to 1/4T the Panner will use quarter

note triplet of the tapped tempo to perform one cycle.

1/4 equals the BPM (tapped Tempo).

The subdivisions available are, 16/1 (16 bars for performing

one period), 8/1, 4/1, 2/1, 1/1, and 1/2-1/32 in straight, dotted

and triplet notes - 1/4 equals BPM (beats per minute).

If you select Ignored the current parameter will use the

Preset value and will not be affected by the Global Tempo.

Curve

(Only in Surround)

Sets the curve of the LFO. Choose between: Square, Sine, or

Triangle.

The most commonly used curve in Panning is Sine.

Pulsewidth*

(Only in Surround Panner)

Controls the division of the Left and Right part of the current

waveform, i.e. if Pulsewidth is set to 75%, Left channel will

be on for 75% of the time. (See Pulsewidth figure above).

LFO Phase

(Only in Surround Panner)

An LFO phase change causes a small delay in one of the

waveform starting points. This means that Left and Right

Содержание FireworX




















































































Результаты поиска

Содержание FireworX

Отзывы:

Похожие инструкции для FireworX

Бренды по названию

Популярные бренды

TC Electronic FireworX, Руководство пользователя

Результаты поиска

Содержание FireworX

Отзывы:

Похожие инструкции для FireworX

Бренды по названию

Популярные бренды