TAYO ZONTES 310T-M 2022, Руководство по обслуживанию

Страница: 86 / 188

86 / 188
3. Replace the shock absorption
a. After removing the muffler assembly, follow the steps
“a” to “d” in the previous "Remove spark plug" to remove the
side covers; follow the steps a to j in the throttle valve body
to remove the stepper motor and clean up carbon deposits
to remove the rear storage box. After disassembly, it is as
shown in the figure below.
b. Remove 2 pieces of M6 decorative buckles ⑴ and 5
pieces of M8 decorative buckles
⑵
. Remove the 2 swell nails
(3).
c. Use 4# inner hexagon to remove 2 bolts ⑷ ; after
grasping the rear armrest, use 12# sleeve to remove 5 bolts
⑸ , and then take off the rear armrest assembly.
d. Remove the boltM6
×
14 at the front of the left tail skirt
with a 4# inner hexagon. Remove the 2 expansion(3) nails at
the bottom.
Grasp the left tail skirt and remove the swell nail (3), and
take off the left tail skirt.
Remove the right tail skirt in the same way.
e. Pull down the front part of the rear mud plate, fix the
nut
⑺
with a 14# sleeve or a torx wrench, loosen the bolt
⑹
completely with a 14# sleeve on the outside, and remove the
nut
⑻
. Be careful not to remove the bolt
⑹
first. Remove the
nut
⑹
by the same operation on the other side. One person
supports the rear wheel assembly, and one person removes
the bolts
⑹
on both sides; lower the rear wheel assembly to
the ground. Nut
⑻
torque standard: 30N.m (3.1 kgf.m, 22
lbf.ft).
f. Grasp the rear right shock absorber and use a 12# sleeve
to remove the bolt
⑻
, and remove the rear right shock
absorber. On the left side, pull the air filter out to expose the
bolt head and then remove the bolt
⑻
. Standard torque:
24N.m (2.4 kgf.m, 18 lbf.ft).
Bolts and nuts for body and engine
installation
Caution:
●Regularly check the body fasteners according to the
maintenance schedule.
●Loose engine fasteners will increase the vibration and affect
the driving experience.
●The M 125 steps are similar to the M310, taking the M310 as
an example.
1. Check the fasteners for the critical parts
Check whether the front disc brake caliper bolts, front
shock absorber bottom cylinder bolts, lower link plate bolts,
rear rocker arm and engine connecting bolts, rear wheel
spline shaft nuts, rear disc brake caliper bolts, and side
bracket nuts are loose. Check whether the Split pin of the
main bracket shaft is abnormal.