TAYO ZONTES 310T-M 2022, Руководство по обслуживанию

Страница: 181 / 188

181 / 188
f. Remove the right pedal trim cover and the right pedal
in the same way.
Removal of the surrounding middle part
Use 4# inner hexagon to remove the two M6×12 bolts
connecting surround middle part and the front storage box
panel and then remove the middle surround.
Disassembly of the surrounding bottom
Grasp the rear part of the around the bottom plate by
hand, and pull it back in the direction of arrow until the
bottom plate is taken out.
Removal of the cooling fan air guide plate
a. Use an 8# sleeve to remove the M6×22 bolts on the left
and the M6×30 bolts on the right, and push the water tank
assembly forward.
b. After removing the expansion nails on both sides, pull
back the protruding installation part of the air deflector and
then remove it. If it is inconvenient to operate, use a 10#
sleeve to remove the 4 M6×12 bolts that fix the fuel tank,
and then remove the air deflector.
Disassembly of the cushion
a. First press the
“ ”
power button of the vehicle,
then press the seat lock switch of the vehicle to open the
seat lock, and then long press the power button for 2
seconds to shut down the vehicle
b. Hold the seat cushion with one hand, remove the 3 M6
nuts fixed on the seat cushion bracket by 10# double offset
ring spanner or 10# sleeve , grasp the seat cushion with both
hands and pull it out obliquely upward according to the angle
of the stud (big arrow direction) cushion. Caution: When the
angle is incorrect and the cushion cannot be pulled out, do
not use brute force to forcibly pull out the cushion to prevent
damage to the threads on the cushion installation studs.
c. Flip the seat to the back, pay attention that the seat
cushion should not be placed directly on the ground or a
hard surface to prevent scratching the cover or edge of the
seat cushion. Hold the decorative cover of the seat cushion
with one hand, then remove the 2 ST4.2×12 self-tapping
screws on the head with a 5# hexagon socket, and remove
the decorative cover of the seat cushion. If you need to
remove the cushion cushion glue, you can directly remove it
by hand.