2-10
CONTROLS
Models C712/C713
Controls
2
Figure 2-38
Pressing the Up or Down Arrow button increases or
decreases the cycle time by 1 minute respectively.
Pressing the SEL button accepts the setting and returns
to the L/R choice screen. Pressing the SEL button again
returns to the Service Menu screen.
Comp On Delay
This option allows the technician to adjust the main
compressor on delay. After selecting the appropriate side
of the machine, the following screen is displayed:
Figure 2-39
Pressing the Up or Down Arrow button increases or
decreases the time delay by one second respectively.
Pressing the SEL button accepts the setting and returns
to the L/R choice screen. Pressing the SEL button again
returns to the Service Menu screen.
Note:
The minimum setting for Comp On Delay is
2 seconds.
Beater Off Delay
This option allows the technician to set the amount of
time the beater motor continues to run after the
compressor has cycled off. After selecting the
appropriate side of the machine, the following screen is
displayed.
Figure 2-40
Pressing the Up or Down Arrow button increases or
decreases the time delay by one second respectively.
Pressing the SEL button accepts the setting and returns
to the L/R choice screen. Pressing the SEL button again
returns to the Service Menu screen.
Mix Pump Off Delay (C712 Only)
This option allows the technician to set the amount of
time that the mix pump runs after the draw valve has
closed (switch opened). After selecting the appropriate
side of the machine, the following screen is displayed.
Figure 2-41
Pressing the Up or Down Arrow button increases or
decreases the time delay by one second respectively.
Pressing the SEL button accepts the setting and returns
to the L/R choice screen. Pressing the SEL button again
returns to the Service Menu screen.
Edit Unit ID
This option allows the technician to enter the factory Bill
of Materials (BOM) code used to assemble the freezer,
the freezer serial number, and the store ID number. The
FREEZER BOM screen is displayed first.
Figure 2-42
Pressing the SEL button scrolls the cursor to the right,
one place for each button press. Pressing the Up or
Down arrow button increases or decreases respectively,
with rollover, the selected digits. Once the correct freezer
BOM has been entered, pressing the SEL button
displays the serial number screen.
Figure 2-43
Repeat the operation as described previously. Once the
correct freezer serial number has been entered, pressing
the SEL button displays the store ID screen.
COMP CYCLE TIME
L CYCLE TIME :
10 MIN
COMP ON DELAY
S
D
N
O
C
E
S
2
:
T
F
E
L
BEATER OFF DELAY
S
D
N
O
C
E
S
0
:
T
F
E
L
MIX PUMP OFF DELAY
LEFT
:
10 SEC
ENTER FREEZER BOM
C 7 0 0 0 0 0 0 0 0
Ŧ
ENTER FREEZER SN
K 0 0 0 0 0 0 0
Ŧ
Содержание C712
