2-4
CONTROLS
Models C712/C713
Controls
2
Continue to enter the proper access code numbers
(8309) until all four numbers are displayed and then
press the SEL button. The Manager's Menu list will
display on the screen, provided the correct access code
is entered.
If an incorrect number is entered for the access code, the
display will exit the menu program when the SEL button
is selected.
Figure 2-9
Manager Menu Options
Press the Arrow buttons to move up or down through the
Menu. Select a Menu option by pressing the SEL button.
Exit the Menu program by selecting EXIT FROM MENU
or pressing the Service Menu button
.
The following menu options are listed in the Manager's
Menu.
EXIT FROM MENU
SERVINGS COUNTER
SET CLOCK
AUTO START TIME
STANDBY MODE
MIX LEVEL AUDIBLE
FAULT DESCRIPTION
FAULT HISTORY
LOCKOUT HISTORY
SYSTEM INFORMATION
CURRENT CONDITIONS
NET SERVICE PIN
Exit From Menu
Selecting EXIT FROM MENU will exit the Manager's
Menu and return the control panel buttons to normal
operation.
Servings Counter
The SERVINGS COUNTER screen is used to reset the
servings counter to zero. The SERVINGS COUNTER
automatically resets to zero when the machine is brush
cleaned.
Figure 2-10
Reset the SERVINGS COUNTER by pressing the SEL
button to advance to the next screen. Press the Up Arrow
button to move the arrow (>) to Yes and then press the
SEL button. The servings counter will reset to zero and
exit back to the Manager's Menu.
Figure 2-11
Set Clock
The set clock option allows the manager or service
technician to adjust the real-time clock if the machine is
in the brush cleaned state. The following message will
display if the set clock option is selected when the
machine is
not
in a brush clean state.
Figure 2-12
If the machine is in the brush cleaned state, pressing the
SEL key would display the following screen.
Figure 2-13
To make any changes, press the Up Arrow to move to
13399
SERVINGS COUNTER
0
0
0
> Next
Reset Counters
ARE YOU SURE?
> Yes
No
SET CLOCK
12:01
10/24/2014
NO CHANGES ALLOWED
Press Any Key
SET CLOCK
12:01
10/24/2014
Change
> Exit
Содержание C712
