86
Model C606
Operating Procedures
Step 4
Install the plunger insert into the plunger tube by
positioning the end of the insert with the beveled
edge and smaller hole to enter into the plunger tube
first.
Step 5
Install the plunger nut onto the plunger tube.
Step 6
Install the knob o-ring into the groove provided in the
knob.
Step 7
Install the plunger tube assembly onto the plunger
assembly by inserting the plunger assembly into the
larger opening on the plunger tube. Push the plunger
assembly, compressing the spring, until the
threaded end of the stem projects through the
smaller opening on the plunger tube and the insert.
(See Figure 219.)
Figure 219
Step 8
Install the knob with the knob o-ring onto the
threaded end of the plunger assembly. Hold the
plunger assembly so that the plunger tube,
compressing the spring, is pulled toward the piston
end as far as it will go. Tighten the knob by turning it
clockwise.
Step 9
Lubricate and install the 1” o-ring onto the groove
provided on the discharge tube. (See Figure 220.)
Figure 220
Step 10
Lubricate and install the 1-5/16” o-ring into the valve
body. (See Figure 221.)
Figure 221
Step 11
Install the discharge tube onto the smaller opening
in the valve body by aligning the flats on the
discharge tube with the locking grooves on the valve
body. Push down the discharge tube until it is seated
into the valve body opening. Turn the discharge tube
clockwise to fully engage it into locking grooves on
the valve body.
Содержание C606
Страница 6: ...Table of Contents Model C606 Notes ...
Страница 16: ...10 Model C606 Operator Parts Identification 140624 Front View Figure 2 ...
Страница 26: ...20 Model C606 Operator Parts Identification 140624 Accessories Figure 11 ...
Страница 30: ...24 Model C606 Operator Parts Identification Beater Door Assembly Shake Side Figure 14 ...
