59
Model C606
Operating Procedures
Figure 128
Step 12
Insert the draw valve from the top, with the draw
handle slot facing forward. (See Figure 129.)
Figure 129
Step 13
Place the door gasket into the groove on the back of
the freezer door. Slide the front bearing over the
baffle rod so the flanged edge is against the door.
DO NOT lubricate the gasket or bearing.
(See Figure 130.)
Figure 130
Step 14
Insert the baffle rod through the beater in the
freezing cylinder. With the door seated on the
freezer studs, install the handscrews. Tighten
equally in a criss-cross pattern to insure the door is
snug. (See Figure 131.)
Figure 131
Step 15
Install the draw handle. Slide the fork of the draw
handle in the slot of the draw valve. Secure with
pivot pin. (See Figure 132.)
Figure 132
Note:
The soft serve side features an adjustable
draw handle to provide portion control, giving a
better consistent quality to your product and
controlling costs. The draw handle should be
adjusted to provide a flow rate of 5 to 7-1/2 oz. (142
g. to 213 g.) of product by weight per 10 seconds.
To INCREASE the flow rate, turn the adjustment
screw CLOCKWISE. Turn the adjustment screw
COUNTER-CLOCKWISE to DECREASE the flow
rate.
Содержание C606
Страница 6: ...Table of Contents Model C606 Notes ...
Страница 16: ...10 Model C606 Operator Parts Identification 140624 Front View Figure 2 ...
Страница 26: ...20 Model C606 Operator Parts Identification 140624 Accessories Figure 11 ...
Страница 30: ...24 Model C606 Operator Parts Identification Beater Door Assembly Shake Side Figure 14 ...
