43
Model C606
Important: To the Operator
120515
The
AUTO START TIME
option allows the Manager
to set the time of day at which the machine
automatically enters the AUTO mode from the
STANDBY mode. The machine must be in the
STANDBY mode without a freezer lock condition in
order to AUTO start at the programmable time. The
AUTO START TIME can also be Disabled and
require starting the AUTO mode manually. (See
Figure 66.)
AUTO START TIME
DISABLED
Enable
>
Disable
Figure 66
Enable the AUTO START TIME by selecting the
AUTO symbol
to move the arrow up to Enable.
Select the CALIBRATION symbol
to advance to
the next screen. (See Figure 67.)
AUTO START TIME
00:00
Change
>
Exit
Figure 67
Program the AUTO START TIME by selecting the
AUTO symbol
to move the arrow to Change.
Select the CALIBRATION symbol
to advance to
the next screen. (See Figure 68.)
AUTO START TIME
00:00
Figure 68
Program the AUTO START TIME by increasing
(AUTO symbol
) or decreasing (OPTIONAL
FLAVOR symbol
) the hour setting above the
cursor. Select the CALIBRATION symbol
to
advance the cursor and program the minutes
setting.
Select the CALIBRATION symbol
to return to the
previous screen with the new time setting displayed.
Select the CALIBRATION symbol
to exit the
screen and return to the Menu.
The
STANDBY MODE
option is used only on
models which have the control panel Standby keys
disabled.
The STANDBY option is used to manually place the
left or right side in the standby mode during long, no
draw periods. Select the STANDBY screen from the
Menu. Select the AUTO symbol
to move the
arrow up to the left (shake) or right (soft serve) side.
Select the CALIBRATION symbol
to activate
Standby for the selected side.
Repeat the steps to activate Standby on the
remaining side. (See Figure 69.)
STANDBY MODE
LEFT
RIGHT
>
EXIT
Figure 69
Discontinue Standby operation for either side by
exiting the Manager's Menu and select the AUTO
mode.
The
BRUSH CLEAN CYCLE
option allows the
Manager to select the maximum number of days
between brush cleaning the machine. The brush
clean cycle may only be changed after the freezer
has been manually cleaned but before it has been
placed in the AUTO or STANDBY mode.
The following message will be displayed if the
BRUSH CLEAN CYCLE option is selected when the
machine is not in a brush clean state.
(See Figure 70.)
BRUSH CLEAN CYCLE
TIME 14 DAYS
No Changes Allowed
Press any Key
Figure 70
Содержание C606
Страница 6: ...Table of Contents Model C606 Notes ...
Страница 16: ...10 Model C606 Operator Parts Identification 140624 Front View Figure 2 ...
Страница 26: ...20 Model C606 Operator Parts Identification 140624 Accessories Figure 11 ...
Страница 30: ...24 Model C606 Operator Parts Identification Beater Door Assembly Shake Side Figure 14 ...
