85
Model C606
Operating Procedures
Step 8
Insert the black shielded brush into the bottom side
of the inlet valve. Move the brush back and forth to
scrub this area, specifically around the steel ball.
(See Figure 216.)
Figure 216
Step 9
Advance the brush completely through the inlet
valve, and pull the brush out of the valve body.
Step 10
Rinse all parts with clear water.
Step 11
Sanitize the parts in an approved 100 PPM
sanitizing solution (examples: Kay-5® or
Stera-Sheen®). Allow the parts to air dry after
sanitizing.
Syrup Topping Pump Assembly
After pump disassembly and cleaning is complete,
assemble the pump.
Step 1
Lubricate and install the seal o-ring into the seal.
(See Figure 217.)
Figure 217
Step 2
Install the seal assembly onto the piston end of the
plunger assembly.
Step 3
Install the washer and spring onto the plunger
assembly. (See Figure 218.)
Figure 218
Содержание C606
Страница 6: ...Table of Contents Model C606 Notes ...
Страница 16: ...10 Model C606 Operator Parts Identification 140624 Front View Figure 2 ...
Страница 26: ...20 Model C606 Operator Parts Identification 140624 Accessories Figure 11 ...
Страница 30: ...24 Model C606 Operator Parts Identification Beater Door Assembly Shake Side Figure 14 ...
