tatsuno OCEAN TOWER Series, Инструкция по установке и эксплуатации

Страница: 16 / 173

TATSUNO EUROPE a.s., www.tatsuno ‐ europe.com
16
The following safety equipment is required to work in a hazardous environment:

Only spark ‐ free tools are permitted when working on the dispenser.

Work on bearings is only allowed using standard tools allowed for this type of work.

It is strictly forbidden to use electric tools.

Only explosion ‐ protected working lights are permitted.

It is strictly forbidden to use telecommunication tools in hazardous areas.
Safety instructions
The following safety instructions must be observed during installation and maintenance:

Avoid inhalation of AdBlue® vapours. Take appropriate measures and use an inhaler if
necessary.

Avoid direct contact of the AdBlue® with the skin.

Wear suitable protective clothing and gloves.

Avoid spills of AdBlue®.

Smoking and open fire are forbidden.

Long hair and ties can be trapped in moving parts. Hair must be reasonably covered.
Safety instructions for CNG
While refilling motor vehicles with compressed natural gas (CNG) is if forbidden to smoke and use open
flame within a radius of 10 m – applies also to passengers inside the vehicle. This ban must be located in
a visible place. Safety labels and symbols are used according to Č SN 018013. A visible notice about
switching off the engine of the refilled vehicle and its auxiliary heating with a combustion chamber must
be located at the dispenser. The vehicle must be secured against spontaneous setting in motion. A carbon ‐
dioxide extinguisher or dry ‐ powder extinguisher with a filling of at least 6 kg must be located at each
device. The device that is out of order must be secured against its misuse by an unauthorized person.
Device design safety
DEVICE DESIGN SAFETY IS GUARANTEED BY THE MANUFACTURER
The dispenser design meets the requirements of Č SN EN 13463 ‐ 1 and Č SN EN 60079 ‐ 0 standards and is
designed for operation in environments designated by symbols II 2G IIA T3 stated on the type label of the
dispenser. With regard to the operation safety in the potentially explosive environment, dispenser compliance
assessment was performed and documentation archiving was carried out according to article 10, par. 1b(2)
of the Government Decree No. 116/2016 Coll. (article 13, par. 1b(ii) of the European Parliament and Council
Directive No. 2014/34/EU) in a Physical ‐ Technical Testing Institute in Ostrava – Radvanice, notified body No.
1026 with the archive number A484 ‐ 16. In terms of pressure safety, EU verification of the unit (Procedure G)
was performed at the CNG dispenser according to the Appendix No. 3, point 11 of the Government Decree No.
26/2003 Coll. as amended (Appendix No. III, point 10 of the European Parliament and Council Directive No.
2014/68/EU) by the notified body No. 1017 TÜV SUD Czech s.r.o., Novodvorská 994, 142 21 Prague 4.
Operating safety
The operator is responsible for the fuel station operation and is obliged to entrust its operation only to trained
employees having relevant authorization. The task of the attendant is, while observing all safety regulations,