tatsuno OCEAN TOWER Series, Инструкция по установке и эксплуатации

Страница: 87 / 173

Fuel Dispensers TATSUNO EUROPE ‐ Installation and User Manual , revision 10, January 2022
87
2.7. NAMEPLATES
Each dispenser is equipped with one, see Figure 56, or in the case of a combined dispenser, with several
nameplates for individual fuels, see Figure 59. If the number of delivery hoses is higher than two then the
dispenser is supplemented with the so ‐ called orientation label, see Figure 58, where it is schematically indicated
what kind of fuel is pumped and with what hose. All data on the dispenser in terms of metrology and safety
according to WELMEC 10.5 and European standards for equipment located in potentially explosive areas (EN
13617 ‐ 1, EN 14678 ‐ 1, EN IEC 60079 ‐ 0 and EN ISO 80079 ‐ 36) is contained in the nameplate. At the same time,
the orientation label serves to metrology inspection for sticking the safety metrology labels stating the execution
of measuring system verification.
Figure 59 ‐ Nameplate location on the combined dispenser
(1 ‐ nameplate of main gasoline/diesel dispenser, 2 ‐ orientation label of main dispenser, 3, 4, 5 – nameplate of AdB, LPG, WSE modules)
Figure 56 ‐ Nameplate of a two ‐ hose
gasoline/diesel dispenser
Figure 57 ‐ Nameplate of the multi ‐
hose gasoline/diesel combined
Figure 58 ‐ Orientation label for
multiple hose dispensers