198
D14049.05
February 2009
Grey Headline
(continued)
TANDBERG
VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction
Getting started
Overview and
status
System
configuration
VCS
configuration
Zones and
neighbors
Call
processing
Bandwidth
control
Firewall
traversal
Appendices
Applications
Maintenance
Command reference - xConfiguration
Bandwidth Pipe [1..100] Bandwidth PerCall Limit: <1..100000000>
If this pipe has limited per-call bandwidth, sets the maximum amount of bandwidth (in kbps) available for any one call.
Default: 1920
Example:
xConfiguration Bandwidth Pipe 1 Bandwidth PerCall Limit: 256
Bandwidth Pipe [1..100] Bandwidth PerCall Mode: <Limited/Unlimited/NoBandwidth>
Determines whether or not this pipe is limiting the bandwidth of individual calls.
NoBandwidth
: no bandwidth available. No calls can be made on this pipe.
Default: Unlimited
Example:
xConfiguration Bandwidth Pipe 1 Bandwidth PerCall Mode: Limited
Bandwidth Pipe [1..100] Bandwidth Total Limit: <1..100000000>
If this pipe has limited bandwidth, sets the maximum bandwidth (in kbps) available at any one time on the pipe.
Default: 500000
Example:
xConfiguration Bandwidth Pipe 1 Bandwidth Total Limit: 1024
Bandwidth Pipe [1..100] Bandwidth Total Mode: <Limited/Unlimited/NoBandwidth>
Determines whether or not this pipe is enforcing total bandwidth restrictions.
NoBandwidth
: no bandwidth available. No calls can be made on this pipe.
Default: Unlimited
Example:
xConfiguration Bandwidth Pipe 1 Bandwidth Total Mode: Limited
Bandwidth Pipe [1..100] Name: <S: 1, 50>
Assigns a name to this pipe.
Example:
xConfiguration Bandwidth Pipe 1 Name: "512Kb ASDL"
Call Loop Detection Mode: <On/Off>
Specifies whether the VCS will check for call loops.
Default: On
Example:
xConfiguration Call Loop Detection Mode: On
Call Routed Mode: <Always/Optimal>
Specifies whether the VCS routes the signaling for calls.
Always
: The VCS will always route the call signaling.
Optimal
: If possible, the VCS will remove itself from the call signaling path, which may mean the call does not consume a call licence.
Default: Always
Example:
xConfiguration Call Routed Mode: Always