225
D14049.05
February 2009
Grey Headline
(continued)
TANDBERG
VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction
Getting started
Overview and
status
System
configuration
VCS
configuration
Zones and
neighbors
Call
processing
Bandwidth
control
Firewall
traversal
Appendices
Applications
Maintenance
Command reference - xConfiguration
Zones Zone [1..200] TraversalClient H323 Port: <1024..65534>
Specifies the port on the traversal server to be used for H.323 firewall traversal calls from this VCS. If the traversal server is a VCS Expressway, this must be the port number that has been
configured on the VCS Expressway's traversal server zone associated with this VCS.
Example:
xConfiguration Zones Zone 4 TraversalClient H323 Port: 2777
Zones Zone [1..200] TraversalClient H323 Protocol: <Assent/H46018>
Determines which of the two firewall traversal protocols will be used for calls to and from the traversal server.
Note: the same protocol must be set on the server for calls to and from this traversal client.
Default: Assent
Example:
xConfiguration Zones Zone 4 TraversalClient H323 Protocol: Assent
Zones Zone [1..200] TraversalClient Peer [1..6] Address: <S:0..128>
Specifies the IP address or Fully Qualified Domain Name (FQDN) of the traversal server. If the traversal server is a VCS Expressway cluster, this will be one of the peers in that cluster.
Example:
xConfiguration Zones Zone 4 TraversalClient Peer 1 Address: "10.192.168.1"
Zones Zone [1..200] TraversalClient RetryInterval: <1..65534>
Specifies the interval (in seconds) with which a failed attempt to establish a connection to the traversal server should be retried.
Default: 120
Example:
xConfiguration Zones Zone 4 TraversalClient RetryInterval: 120
Zones Zone [1..200] TraversalClient SIP Poison Mode: <On/Off>
SIP requests sent out this zone will be 'poisoned' such that if they are received by this VCS again they will be rejected.
Default: Off
Example:
xConfiguration Zones Zone 4 TraversalClient SIP Poison Mode: Off
Zones Zone [1..200] TraversalClient SIP Port: <1024..65534>
Specifies the port on the traversal server to be used for SIP calls from this VCS. If your traversal server is a VCS Expressway, this must be the port number that has been configured in the
traversal server zone for this VCS.
Example:
xConfiguration Zones Zone 4 TraversalClient SIP Port: 5060
Zones Zone [1..200] TraversalClient SIP Transport: <TCP/TLS>
Determines which transport type will be used for SIP calls to and from the traversal server.
Default: TCP
Example:
xConfiguration Zones Zone 4 TraversalClient SIP Transport: TCP
Zones Zone [1..200] TraversalServer Authentication UserName: <S: 1, 128>
The name used by the traversal client when authenticating with the traversal server. If the traversal client is a VCS, this must be the VCS’s Authentication User Name. If the traversal client is
a gatekeeper, this must be the gatekeeper’s System Name. For other types of traversal clients, refer to the VCS Admin Guide for further information.
Example:
xConfiguration Zones Zone 5 TraversalServer Authentication UserName: "User123"
