TAMURA NT110, Инструкция по эксплуатации

Страница: 27 / 52

NT110 Instruction Manual (EN)
2D-53-0002680A
18
7-2-4 Bus Master
[ 1 ] M1/M2/SUM
Recall Bus Master to Select Encoder.
Operate Select Encoder to adjust the Fader Level of Bus
Master.
[ 2 ] INS/CUT/APFL/OSC/TB/SEL
Press one of these buttons to switch the button functions of
Select Encoder.
7-2-5 OSC
[ 1 ] MENU
Display the OSC menu on the touch panel.
After displaying the menu, press it again to return to the
Meter screen.
[ 2 ] ON / ENABLE
Press the ON button while pressing the Enable button to
have OSC interrupt the output selected as OSC Set
(Preset).
The ON button is lit while OSC interrupts any of the outputs.
Press the lit ON button to cancel all the OSC interruptions.
7-2-6 Monitor
Perform various controls of Monitors 1 to 4.
[ 1 ] MONI2 / MONI3 / MONI4
Select a monitor that you want to control. Only one of these
buttons can be selected. When all the buttons are off, Moni1
is selected.
[1] [2]
[1]
[2]
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]