TAMURA NT110, Инструкция по эксплуатации

Страница: 30 / 52

NT110 Instruction Manual (EN)
2D-53-0002680A
21
7-2-8 Mixer Control
[ 1 ] D.SAVE/P.LOCK
Press this button to enter the Display Save status in which
the touch panel goes off. Press this button again to exit
the status.
Press and hold this button to lock the operations on the
panel except using this button. Press this button again to
exit the status.
[ 2 ] DEFINE
Select Encoder can be assigned to any user-specified
function. (Define)
Press this button to switch Select Encoder only for the
assigned channel to the Define function.
When you press a desired Select Encoder while pressing
this button in the Channel Setting screen, it is defined as the
Define function of that channel.
[ 3 ] APFL CLEAR
This button is lit when at least one of the APFL buttons is on.
Press this button while it is lit to deselect all the APFL
buttons.
[ 4 ] EDIT
Display the Edit menu on the touch panel.
The Edit menu allows you to copy and clear the channel
parameters.
7-2-9 Bank/Layer
[ 1 ] BANK1/2/3/BUS
Switch the Fader 16 ch Banks.
There are three Banks for which the user can freely
configure the layout: Bank1, Bank2, and Bank3. Each of the
Banks has two layers (A/B).
Selecting the Bus switches the Fader 16 ch Banks to the
Bus. The Bus Bank has two layers: Layer A fixed to M1 and
M2 and Layer B fixed to Sum.
[ 2 ] LAYER A/B
Switch the Fader 16 ch Layers.
Press this button to switch the all Fader 16 ch Layers
simultaneously.
Press the Fader Sel button while pressing this button to
switch Layers for each channel.
[1]
[2]
[3]
[4]
[1]
[2]