TAMURA NT110, Инструкция по эксплуатации

Страница: 24 / 52

NT110 Instruction Manual (EN)
2D-53-0002680A
15
7-1-10 Connection of DSP CARDs with NT Mix
To use the NT Mix application, connect DSP CARD(s) to a computer on which the NT Mix
application is installed, using a LAN cable of CAT5E or higher.
If Primary DSP is ACT (running), connect with Primary DSP with LAN cable.
If the Secondary DSP is ACT (running), connect with the secondary DSP with a LAN cable.
Note: Connect a DSP CARD with a computer directly, not via any external equipment such as a
hub.
Note: If the DSP CARD is composed of two boards and the DSP CARD of the ACT switches from
Primary to Secondary, it is necessary to change the connection of the LAN cable.
[Connection with a NT Mix: One DSP CARD configuration]
[Connection with a NT Mix: Two DSP CARD configuration Primary DSP CARD = ACT]
[Connection with a NT Mix: Two DSP CARD configuration Secondary DSP CARD = ACT]
CAT5E Cable
CAT5E Cable
CAT5E Cable