TAMURA NT110, Инструкция по эксплуатации

Страница: 47 / 52

NT110 Instruction Manual (EN)
2D-53-0002680A
38
10-9 Backing Up and Uploading NT110 Data
Have ready a PC on which NT110 NT Mix has been installed.
10-9-1 Transferring Backup Data from NT110 to PC File (Backup)
1 Connect the DSP CARD and the PC with a LAN cable.
If two DSP CARDs are mounted, connect the cable to the ACT(running) DSP CARD.
(If the Primary DSP CARD is Active, connect the cable to the Primary DSP CARD; If
the Secondary DSP CARD is Active, connect the cable to the Secondary DSP CARD.)
2 Turn on the NT110 power.
3 Start up NT110 NT Mix that has been installed on the PC.
4 Connect NT110 NT Mix.
5 On NT110 NT Mix, select Maintenance - Mixer Data - Backup.
6 Using the displayed dialog, select any folder and press the Backup button.
Data is transferred from NT110 to a file in the selected folder. This process takes some
time. Wait until it is completed.
The stored file contains setting (including Setup setting) and all the Preset Program
files of NT110.
Press the connection button to connect NT110 and the PC.
When connection is established, the button
displays Online.
Select Maintenance - Mixer Data -
Backup.