TAMURA NT110, Инструкция по эксплуатации

Страница: 26 / 52

NT110 Instruction Manual (EN)
2D-53-0002680A
17
7-2-1 Touch Panel
The touch panel displays the audio meter, channel settings, etc. It also allows you to make
various settings of mixers with touch panel operation.
7-2-2 Preset Program
Perform various controls of the Preset Program (function to store and recall mixer settings
to and from the internal memory).
The Preset Program memory has a capacity for storing 99 mixer settings.
[ 1 ] MENU
Displays the Preset Program menu on the touch panel.
After displaying the menu, press it again to return to the
Meter screen.
[ 2 ] SET1/SET2/ENABLE
Press and hold the Set1 button while pressing the Enable
button to recall Preset Program No.1.
Press and hold the Set2 button while pressing the Enable
button to recall Preset Program No.2.
7-2-3 DSP/On Air
[ 1 ] DSP CHANGE OVER
If DSP CARDs are in a redundant configuration, press this
button to activate the DSP CARD mounted in the
Secondary DSP Slot.
If DSP Auto Changeover is set to Enable in the Setup menu,
the DSP CARD is automatically switched. In this case, this
button is used to forcibly select the DSP CARD mounted in
the Secondary DSP Slot.
[ 2 ] ON AIR
Press this button to set the mixer to ON AIR.
In the ON AIR status, a function selected in the Config
menu (prohibiting OSC or Talk Back transmission, etc.)
starts working.
[1] [2]
[1]
[2]