TAMURA NT110, Инструкция по эксплуатации

Страница: 46 / 52

NT110 Instruction Manual (EN)
2D-53-0002680A
37
10-8 Initializing Internal Data
Perform the following procedure to initialize internal data when required.
If NT110 does not start up due to an internal data error, you may be able to clear the error
using this procedure.
* Data to be initialized by this procedure
- All the program settings such as the fader layouts, output matrixes, and EQ
parameters
- SETUP setting data (Data configured in the SETUP menu)
* Data NOT to be initialized by this procedure
- PRESET PROGRAM (01 to 99) data
- Log record data
1 Turn on the NT110 power.
2 Before the NT screen is displayed during startup, keep pressing the four buttons,
LAYER "A" and "B" and PRESET PROGRAM "MENU" and "ENABLE" until the
NT110 Initialize message is displayed.
Caution: Never turn off the power until the startup is normally completed when the Meter
screen is displayed.
3 The internal data initialization is completed when the Meter screen is displayed.
NT screen
Keep pressing LAYER "A" and "B" and PRESET
PROGRAM "MENU" and "ENABLE."