User Guide
The menu
Paper width (Pagewid)
This parameter determines the actual paper width.
Select the
Pagewid
menu (3)
Setting options: From
20
to
136
in 1/10 inch steps
Default setting:
136/10
inch (136 characters at 10 characters/
inch)
If
Head up = On
, the print head moves to the calculated center of the paper during the time the paper
is moving in the protected zone.
If
Rightzo = ON
(see below), the print head moves out of the perforation zone on the right as long as
the paper is being transported.
Set the printing width rather than the actual paper width.
Setting options:
On
/
Off
Default setting:
Off
69
Head up Pagewid
Online
Setup
Back
Next
2
1
3
4
Pagewid=136/10"*
Online
Setup
Set
<
>
Exit
2
1
3
4
Leftzon Rightzo
Online
Setup
Back
Next
2
1
3
4
Leftzon=Off
*
Online
Setup
Set
<
>
Exit
2
1
3
4
Select the
Leftzon
menu (2) (stands for left zone).
Confirm your settings with the
Set
key (1)
Press the
Next
key (4) to access the next group of parameters.
Left-hand area (Leftzon)
If the parameter is On, the printhead moves out of the perforation zone (area) on the
left as long as the paper is being transported. The Pagewid setting has no influence
(see above).
Confirm your settings with the
Set
key (1)
Press the
Next
key (4) to access the next group of parameters.
