User Guide
The menu
Paper parameters (Paper)
Selects the paper parameters
Formlen
(form length),
FormAdj
(first printing
position) and
Head
(printhead gap, only if
AGA=Off
) separately for each paper
source in the current menu.
Non-installed and with the parameter
PapOpt
activated options cannot be selected.
Press
Paper
(2) key.
You can now choose between the following paper options:
► Tractor 1
► Tractor 2 (front, option)
Select the desired paperway, in our example
Trac1
(2). Press
Next
(4) key, to proceed to the installed
optional paperways.
Form length (Forml)
You can define the form length in one of two ways: via the number of lines or via
standard formats (e.g. Letter 11”).
If you wish to define the form length via a line format, press
Line
(2) key.
Use the
<
(2) or
>
(3) key to select the desired setting.
Setting Options:
6 to 144
Default Setting:
66
59
Paper AutoTear
Online
Setup
2
1
3
4
Back
Next
Trac1
Forml FormAdj
Online
Setup
2
1
3
4
Back
Next
Lines
Standard
Online
Setup
2
1
3
4
Back
Next
6 LPI = 66
*
Online
Setup
Set
<
>
Exit
2
1
3
4
Press
Forml
(2) key.
Sets the form length via line formats. Please note that the adjustment in
Lines
depends on the
selected LPI. For example 8 LPI at a selected line number of 88 lines results in a formlength of 11
inches (88 lines/[8lines/inch]) = 11 inches). The selectable range is between 1 and 22 inches, i.e. for 2
LPI from 2 to 44 lines and for 12 LPI from 12 to 264 lines.
If the form length is set it will not be changed by changing the LPI later on.
Confirm the setting by pressing the
Set
key (1).
