User Guide
Advanced menu
Form length (Forml)
The
Formlen
function allows you to set the basic form length to meet your
requirements. 11 inches are usual in the USA, as opposed to 12 inches in Europe.
Select the
Forml
menu (2).
Setting options:
12
or
11
Inch
Default setting:
11 inches
for 220–240 V printers,
11 inches
for 120 V printers
The value defined here is set in all five menus and for all paper paths. The setting made here is not
changed by loading the default (factory) settings by pressing all four function keys.
97
Formlen=11"
*
Online
Setup
Set
<
>
Exit
2
1
3
4
Automatic gap adjustment (AGA)
This function allows you to switch the Automatic Gap Adjustment (AGA) off or on.
AGA=On
: printer checks paper thickness and changes gap adjustment if necessary (default).
Measurements take place
– after power-on
– whenever changing the paper path, when loading paper
AGA = Off
: selects manual gap adjustment; the value can be set for each paper source and each of
the five menus available.
Confirm the setting by pressing the
Set
(1) key. The printer automatically leaves test mode, performs a
re-initialization and assumes online mode.
Setting options:
Off/On
Default setting:
On
Select the
AGA
menu (3).
PMS
AGA
Online
Setup
Back
Next
2
1
3
4
AGA=On
*
Online
Setup
Set
<
>
Exit
2
1
3
4
Formlen
AGA
Confirm your setting with the
Set
key (1)
Press the
Next
key (4) to access the next group of parameters.
