Settings
User Guide
Setting the first printing line (TOF)
You can use the TOF function for setting the position of the first printing line for each paper source and
each menu individually.
Before using the TOF function, you should first set the tear position; see
Setting the tear position
.
The paper is fed to the position where the
bottom edge of the first printing line
A
is
aligned with the tear edge
B
of the printer.
The factory setting for the first printing
position (TOF) is 12/ 72" (4,23 mm/1/6
inch). This is equivalent to the second line
from the top.
Press the
<
(2) or
>
(3) key to move the first printing line to the
desired position.
You can set values from 0 to 220/72" for fanfold paper.
35
Adjust
Paperway
Menu
Char
Online
Setup
2
1
3
4
TOF
Head
Tear
Online
Setup
2
1
3
4
B
A
FormAdj= 12/72"*
Set
<
>
Exit
Online
Setup
2
1
3
4
Press the
Setup
key. The printer changes to setup mode.
Press the
Adjust
(2) key.
Press the
TOF
(3) key.
The selection made will be retained after switching off the printer. If the Paper is
already loaded into the Printer and a change to the Form Adjust is made, the Paper
will need to e “Parked and Reloaded”.
Confirm the setting by pressing the
Set
key (1).
Press the
Next
key (4) to access the next group of parameters.
