User Guide
The menu
Selecting Protocol (Emulate)
Selects the emulation for the USB or Ethernet Interface. When a printer
understands the control set written for another printer type, it is said to emulate
the other printer.
MTPL is also active in IBM or Epson emulation mode.
Press
Protocol
(3) key. After pressing, select, by pressing te
key under the proper communication port. First to display will
be
Parallel Serial
but if you press key #4, Next,
USB Eth
(Ethernet) will display.
Afgter selecting your I/O port, use the
<
(2) or
>
(3) key to
select the desired emulation.
Setting Options:
Epson ESC PS/2, IBM XL24, DEC PPL2
Default Setting:
EPS/2
for Parallel,
DEC PPL2
for Serial,
Epson ESC PS/2
for USB,
DEC PPL2
for Ethernet
If the printer is switched to online mode after changing the emulation, it performs a
reset.
Confirm the setting by pressing the
Set
key (1). Press the
Next
key (4) to access
the next group of parameters.
Bidirectional printing (PrinDir)
Setting
On
: Printer prints in both directions (bidirectional). Setting
Off
: Printer
prints only in one direction (from left to right).
Press
PrinDir
(2)
key.
Use the
<
(2) or
>
(3) key to select the desired setting.
Setting Options:
Bidir/Unidir
Default Setting:
Bidir
Confirm the setting by pressing the
Set
key (1).
The setting On will not be overwritten by ESC sequences.
47
ESCChar Protocol
Online
Setup
2
1
3
4
Back
Next
Epson LQ-2550
*
Online
Setup
Set
<
>
Exit
2
1
3
4
Prindir I/O
Online
Setup
2
1
3
4
Back
Next
Prindir=Bidir
*
Online
Setup
Set
<
>
Exit
2
1
3
4
