User Guide
Installation
Placing your printer
Place the printer on a solid, flat, surface,
ensuring that the printer is positioned in such a
way that it can not topple, and that there is easy
access to the control panel and paper input
devices. Also ensure that there is sufficient
space for the printed output.
If you expect that frequent forward and reverse
feeds will occur, you should place the printer as
shown in the figure, if possible.
The power supply cable may be
damaged if the paper edges constantly
chafe the insulating sheath.
The user must always ensure that there is
sufficient distance between the power
supply cable and the paper.
When selecting the printer location, observe the following additional instructions:
Never place the printer in the vicinity of inflammable gas or explosive
substances.
Do not expose the printer to direct sunlight. If you cannot avoid
placing the printer near a window, protect it from the sunlight with a
curtain.
When connecting the computer with the printer, make sure not to
exceed the permitted cable length
(see
Interface specifications
)
.
Ensure sufficient distance between the printer and any heating
radiators.
Avoid exposing the printer to extreme temperature or air humidity
fluctuations. Above all take care to avoid the influence of dust.
It is recommended to install the printer in a place which is acoustically
isolated from the workplace because of the noise it may produce.
7
STOP
STOP
