T A L K S W I T C H C O N F I G U R A T I O N
89
Programming the TalkSwitchTS-350i or TS-550i IP phone as an external IP extension
If you are setting up an external IP extension, you must ensure there is a communication path
over the network between your phone and your TalkSwitch systsem. See
Configuring the router
on page 82.
Program the following settings into the phone. On the phone:
1. Press the
button (TS-350i) /
button (TS-550i).
2. Press
3
to enter the
Phone Settings
menu.
3. Press
7
to enter the
Firmware Update
menu.
4. Press
2
to enter the
TFTP Server Address
menu.
5. Use the keypad to enter the public IP address or FQDN of the TalkSwitch system, and then
press the
OK
softkey.
6. Press the
button (TS-350i) /
button (TS-550i) to exit the menu.
7. The phone will request you reboot the phone. Press the
Yes
softkey to initiate the reboot.
It should take no more than 1 minute for boot process to finish. During this process, the
phone contacts the TalkSwitch unit, which automatically registers and configures the
phone. When complete, the phone will display the extension name and extension number.
The phone is now ready for use.
If registration does not work
If the IP phone is not successfully registered and configured, perform the following steps. On
the phone:
1. Press the
button (TS-350i) /
button (TS-550i).
2. Press
6
to enter the
default all settings
menu.
3. Press the
Yes
softkey to default the settings.
4. Press the
button (TS-350i) /
button (TS-550i) to exit the menu.
5. The phone will request you reboot the phone. Press the
Yes
softkey to initiate the reboot.
It should take no more than 1 minute for boot process to finish.
6. If setting up an external IP extension, follow the steps in
Programming the TalkSwitch IP
phone as an external IP extension
after the phone reboots.
7. Contact your reseller or TalkSwitch Customer Support if registration is still unsuccessful.
