Takeuchi TB175W, Руководство по ремонту

Страница: 30 / 851

II-12
SPECIFICATIONS
RECOMMENDED LUBRICANTS
Select the appropriate fuel, lubricant and grease according to the temperature by referring to the table below.
• Regardless of the specified time, change the oil if it becomes too dirty or degraded.
• When refilling, never mix oils of different brands. If a brand is to be changed, replace the whole fuel/oil.
*: For water, use tap water (soft). Do not use well or river water.
When the ambient temperature drops below 0°C, add coolant (antifreeze). Follow the coolant manufacturerʼs
instructions to determine the mixture ratio.
**: The replacement interval for hydraulic oil depends on the oil type being used. New machines are shipped
from the factory with the Takeuchi genuine hydraulic oil 46. This manual describes when to replace the
hydraulic oil assuming that this Takeuchi oil 46 is used. When a conventional antiwear hydraulic oil is used,
replace it every 2000 hours.
Part Type
Type by air temperature
-20 -10 0 10 20 30 40°C
When to change/
replenish
Capacity
Engine oil pan Diesel engine oil
API: CF class
Every 250 hrs
after the first 50
hrs
Upper limit 10.2 L
Lower limit 5.7 L
SAE 10W-30
SAE 15W-40
Hydraulic oil
tank
Takeuchi genuine
hydraulic oil 46
Every 4000 hrs**
Total amount of
oil: 135 L
Tank capacity:
68 L
ISO VG46
Anti-wear hydrau-
lic oil
Every 2000 hrs**
ISO VG32
ISO VG46
ISO VG68
Engine cooling
system
Cooling water
(water + coolant)*
Every 1000 hrs 12.0 L
Mixture of 50% coolant
Mixture of 30% coolant
Hub
Gear oil
API: GL-4
SAE 90 Every 1500 hrs 1.0 L
Transmission
Gear oil
API: GL-4
SAE 90 Every 1500 hrs 1.3 L
Differential
Gear oil
API: GL-4
SAE 90 Every 1500 hrs 8.5 L
Undercarriage
Lithium grease
EP-2
NLGI No.2
––
Every 250 hrs
As required
Slew bearing Every 50 hrs
Working equip-
ment
Daily or every
10 hrs
Levers When required
RECOMMENDED LUBRICANTS