14
Precautions For Use Of Basin Products
Precautions for Handling Synthetic Leather
●
Stains caused by clothing dyes
The synthetic leather of this product may become stained by direct contact with clothes or belts.
If there is stains, wipe clean as quickly as possible with a 10% detergent solution diluted using
water to prevent permanent staining. Then, wipe using water and conduct a thorough dry wiping
after that.
●
Take care of deformation or stains due to direct contact
- Direct contact with other objects such as plastic products, painted items, solvents or adhesive
tape may cause changes to the surface luster, cracking, deformation or peeling.
- Direct contact with newspaper or printed paper may cause stains.
- Direct contact with items of clothing such as printed images of t-shirts, or jeans may cause
discoloration of the synthetic leather of this product.
- Direct contact with solvents such as benzene, nail polish remover, alcohol, oil (including beauty
treatment oils) may cause discoloration, melting of the surface, elution of the plasticizing agent,
changes to surface luster, hardening/softening or peeling.
- Using bleach or bleached sheets may cause changes to surface luster or discoloration.
- Installing this product next to sources of excess heat such as irons or heaters may cause defor-
mation or discoloration.
- Protect this product from direct sunlight by installing curtains. Failure to follow this instruction
may cause changes, shrinking, discoloration or fading of the leather surface.
- Placing heavy objects for a long period of time may leave an imprint or wrinkles on the synthetic
leather that cannot be removed.
●
Specifications of synthetic leather of this product
[SUITE]
The synthetic leather used on this product has fine irregularities on its surface and is not lippery. As
its surface has a mat finish, attached dirt may become conspicuous.
[NOBLE]
The synthetic leather used on this product expresses the texture of genuine leather and has a
slippery characteristic.
You may also see the white inner layer through the thread holes in the seams.
The leather on this product has wrinkles (gathers) for design purposes. The wrinklepattern may vary
in width, length, or interval depending on the manufacturing method. Also, to make the seat cushion
voluminous, a soft cushion material is used. In the course of long use or depending on the usage
conditions, the wrinkles may become flattened.
This product uses pottery for the basin.
Note in advance that bends and deformations cannot be avoided depending on the product in molding
of the neck position and the pottery, and there are slight variations in height, shape, and weight.
In addition, because of the nature of pottery, pouring hot water in a pottery part may result in a sudden
expansion of that part, causing cracks in the surface.
Do NOT pour hot water in the pottery. Failure to follow this instruction may damage to the pottery,
causing injury, or cause water to enter the upper unit due to a water leak, resulting in formation of rust.
