50
Daily Inspections
These may cause pain or transfer dirt to the customer's
neck and head. The neck cushion and head pillow are
consumable supplies. Replace them as soon as
possible.
Remove any hair and other objects trapped in the hair
catcher. [page 41]
Water may be leaking from inside the basin. Open the
maintenance cover and check inside [page 45], and
stop using the product immediately if there is water
leaking from the pipes.
If there is abnormal noise or the water does not turn off
properly when the tap is closed firmly, there may be a
malfunction in the stop valves of the tap.
Replace the sponge, if the smell of sponge becomes a
concern from outside the shower head holder.
(Available at additional cost)
Oil may be leaking from the hydraulic cylinder.
Stop using the product immediately.
Have the neck
cushion and head
pillow degraded?
Is there an abnormal
odor coming from
the basin drain?
Is there any water
leaking from the
basin installation
surface?
Does the tap work
properly?
There is a strange
odor from shower
head holder.
Is there any oil
leaking?
Check that there is no tearing, dirt
or sinking of the neck cushion and
head pillow surface.
Check if there is an abnormal odor
coming from the basin drain.
Visually check around the basin
installation surface to see if there
are any water leaks.
Check that there is no water pooled
inside base plate F.
[page 40]
Turn the tap and check if hot water
is output properly and that there is
no abnormal noise, then close the
tap and check that hot water stops
properly.
* An abnormal gushing sound may
be emitted as water flows.
[page 29]
Check if there is a strange odor
from shower head holder.
Check that there is no oil around
the bottom of the seat base cover.
Inspect item
Inspection method
If the inspection results show defects
Inspect the product every day
Remove the object that is blocking the drain. If the drain
is blocked, water that is turned on accidentally or a
slight trickle of water due to an increase in water
pressure at night may cause water to spill from the
basin, leading to water leakage.
Turn the taps firmly and turn the water off properly. If
the water does not turn off completely, there may be a
malfunction in the stop valves of the tap. Close the stop
valves in the water supply pipe and hot water supply
pipe [page 45, 46], and stop using the product immedi-
ately.
Is the drain blocked?
Has the tap been
turned firmly?
Check that the drain is not blocked
with the drain cap, towel or
shampoo cloth.
Turn the taps firmly in a clockwise
direction and check that the water
turns off properly.
Inspect item
Inspection method
If the inspection results show defects
Always inspect the product after work every day
