27
Changing the preset position
1
With the UP/Seat lowering switch, lift or lower the seat to the desired height to set as
the preset position.
2
Turn the power switch off.
3
Turn the power switch on while pressing the preset button located at the top right of
the power switch. A "beep" setting sound will be emitted five seconds after turning
the power switch on while pressing the preset button.
[Setting complete]
The standard preset position is adjusted in advance when the product is shipped from the factory.
To change the preset position, follow the procedure below to set the new position.
Preset button
Automatic return button
* The set position and the preset position may differ slightly depending on the characteristics of the seat
itself and the environment it is being used in. After the setting is complete, use the automatic return
function to lower the seat to its initial position, press the preset button and check that the seat has
been lifted to the set position.
* The automatic return button is used when repairing the seat. Be sure that customers do not press the
automatic return button, as this may alter the settings.
* The preset button and automatic return button are not operating switches. The seat will not move even
if these buttons are pressed.
Power switch
ON
OFF
