21
Check the direction of the neck cushion
and neck core.
Hold the neck cushion and adjust the
neck core so that it is aligned with the
center of the neck cushion.
Fasten the snap buttons (2 locations)
while pulling on the neck cushion.
Align the height of the neck core and
neck cushion ends (both ends).
Press the neck core to the neck base
and attach.
Align the height
Align the height
Neck core
Neck cushion
Neck core
Snap button
Slit
Fasten the snap button at
the bottom surface
of the neck core.
Neck base
Dowel hole
Slit
* The slit should
face the seat side.
Slit
１
１
２
３
５
４
Be sure to press the neck core in the correct
direction.
The
slit
in the neck cushion should face the
seat side .
Align the snap button with the bottom
surface of the neck core as shown below.
For Side wash basin
For Side wash basin
Attach neck cushion
Seat side
Seat side
Basin side
Basin side
Seat side
Seat side
Seat side
Seat side
Basin side
Basin side
Seat side
Seat side
Basin side
Basin side
〈
Top view
〉
Do not force the neck cushion if it does not fit smoothly. Instead, check the following
points.
Forcing the neck cushion on may cause damage to the neck base or injury to custom-
ers.
- Check the neck core insert the direction.
- If the neck cushion is loose, check the direction of the neck cushion toward the neck
core.
- If the neck core dowel hole is clogged with dirt, clean and remove the dirt before
use.
Caution
